Fixing a Speaker Cabinet by replacing a Home Theater Speaker
When it comes to great audio, there is part of a home theater that overlooked the fact that most speaker cabinets. And 'the last link in the chain of sound and the last chance to hear all this control. The speaker plays the sound as sound waves in air, the subtle differences in the sound produced. What happens if you have a blown speaker in one of your cabinets? You are buying solve the problem or simply a new one?
Usually the answer to this question isis an unqualified yes, simply for the reason that the cabinets were built with the speakers in mind. This is the one established for them. Thinking about the amount of mathematics and engineering, who helped build the cabinet with a certain amount of airspace in the eye. These cabinets are designed specifically for old speakers. The installation of other speakers will not sound the same old speakers.
Here's a simple step by step, how to remove the speaker Badfrom the cabinet and repair.
Take the speaker is working and put it on the back to remove the speaker grille. Some networks of others. Some people simply pop in place, while others are fixed with screws visible from the side or front of the cabinet.
Now the grid was removed, there will be the next time that the first screw to screw the poor from the speaker, and then the screw opposite the first. All screws should be moved to another coupleOrder.
Well, this list of speakers from the cabinet. There will still be connected by wires to the other speakers and the head. Some are connected by two wires, while the other four. It should never come a time when you remove a speaker and there is only one wire. If this is for you to see that this is the case, then you may be lucky and the speaker is only interrupted and not extinguished.
Now take the wires hanging from the back and pull out the cards in plastic diffuserConnections. Never work on the wire itself, can damage the finish. The cards must be color-coded for you) to distinguish between the red positive (and negative (black) wires. If not, then simply label with a marker pen before removing it. Take care not to let the wires fall the room they are removed from their taping at the sides.
Make sure your speakers wiped out and in effect to determine the resistance between the two is deadReports tab positive and negative. If you are one on the bench for less than one ohm or read more than twice the rating of impedance, you have a bad speaker. If you have a reading between the two areas, well, then nothing wrong with the speaker. Another option is to lightly press the center of the cone. The speaker is skipped when you make a scratching sound, or does not return to its original form.
Now you have your speakers ready to go againYou need the cable, connecting the ports on the appropriate register. Set the speaker in the mounting hole and replace the screws in the same way as pairs of opposites used previously.
Finally, we want to tighten all screws, replace the grille and rear diffuser, the return of the upright.
Tags : 42 inch LCD TV Ojon Hair Products


















